NexTract Chromatography System is a full-featured, flexibly configurable and compactly designed chromatography system for laboratory-level research and method development, capable of efficiently performing separation and purification of complex biological samples ranging from micrograms to tens of grams. The system supports a variety of chromatography techniques and meets the automation requirements required to provide high purity. The system can be freely configured and upgraded at any time, and offers a variety of options based on your purification needs to further improve its performance.
Modular design, flexible expansion.
High-precision plunger pump with titanium alloy pump head, better biocompatibility and corrosion resistance.
Integrated valve design, minimizes the overall delay volume in the flow path, improve the separation efficiency.
pH valve enabling multiple flow path schemes without the need of disassembling during calibrations
Software integrated DOE functionality, allowing for minimal experimental input and intelligent analysis to achieve optimal process conditions and results.
Practical size for easy placement on a laboratory bench or in a freezer.
Model | NexTract025 | NexTract150 | |
System pump | Type | Piston pump, titanium alloy pump head | |
Flow rate | 0.001-25mL/min | 0.01-150mL/min | |
Flow rate accuracy | ±1.2% | ±1.2% | |
Flow rate precision | RSD<0.5% | RSD<0.5% | |
Pressure range | 0-34Mpa | 0-10Mpa | |
MIxer | Type | Magnetic stirring electric mixer | |
Volume | Standard: 1.4mL Optional: 0.6mL | Standard: 2mL Optional: 5mL | |
UV detector | Wavelength range (Choose one of three) | F2-Fixed dual wavelength 254+280nm | |
V2-Variable dual wavelength detector, 190-400nm | |||
V4-Variable four wavelength DAD detector, 200-800nm | |||
Conductivity detector | Detection range | 0.001- 999.999mS/ cm | |
Detection accuracy | ±2% | ||
Temperature detector | Detection range | 0-100℃ | |
Detection accuracy | ±1℃ | ||
pH detector | Detection range | 0-14 | |
Detection accuracy | ±0.1 | ||
Valve | Automatic injection valve | Supports load, inject, waste, Max. working pressure: 3000psi | |
Inlet valve | 8 channel inlet valve with built-in bubble sensor/2 channel inlet valve | ||
Column valve | Single column valve, can be connected to 1 column, support forward and reverse flushing, bypass function, withstand pressure: 20Mpa | ||
Five column valve, can be connected to 5 column, support forward and reverse flushing, bypass function, withstand pressure: 20Mpa | |||
Outlet valve | 2/12 channel | ||
pH valve | Five modes, supports pH and flow restrictor online simultaneously, pH online, flow restrictor online, bypass, calibration | ||
Bubble sensor | External bubble sensor, real-time detection of air bubbles in the pipeline | ||
Column pressure detector | Monitor pre and post column pressure | ||
Sample pump (Includes an 8 channel sample selection valve with an integrated bubble sensor) | Flow rate | 0.001-25mL/min | 0.01-150mL/min |
Pressure range | 0-34Mpa | 0-10Mpa | |
Accessories | Workstation | Chrom X software | |
Installation toolkit | Includes PEEK/PTFE pipe, pipe connectors, column clamp, back pressure valve, installation manual, common tools | ||
Fraction collector | Open type | Supports automatic identification of double trays, support 96, 48, 24 deep hole plate, 1.5mL, 15, 50mL centrifugal tube tray collection | |
Fully enclosed temperature control collector | Refrigeration range: 6-20 ℃, support 96, 48, 24 deep hole plate, 1.5mL, 15, 50mL centrifugal tube tray collection |
Please enter your e-mail address and we will send you the User’s Manual ASAP
If you have any needs, please fill out the form below and we will contact you as soon as possible.